Remove back panel screws and lift panel clear
Remove fixing screws from the four b
cross bearing (Fig. 2, Item Y) then remove
Fix back panel with 3 screws previously removed
Close the 4 holes on the cabinet with the plastic
blanking plugs that you will find in the accessories
bag (Fig. 2, Item X & Z).
After selecting a permanent location,
should be properly leveled to prevent vibration.
To do this, adjust one or both front levelers, as
osening the lock nuts. Once your
washer is perfectly leveled, be sure to tighten the lock
This appliance must be grounded. In the event of malfunction or breakdown, grounding will reduce the ris
shock by providing a path of least resistance for electric current. This appliance is equipped with a cord having
grounding conductor and a grounding plug. The plug must be plugged into an appropriate outlet that is
alled and grounded in accordance with all local codes and ordinances.
Improper connection of the equipment
onductor can result in a risk of electric shock.
Check with a qualified electrician or serviceman if you are in doubt as to whet
her the appliance is properly grounded.
Do not modify the plug provided with the appliance.
If it will not fit the outlet, have
a proper outlet installed by a qualified electrician.
FOR YOUR OWN PROTECTION, AND TO PREVENT ACCIDENTS, INJURY AND FIRE, PLEASE READ
•
Destroy the carton and plastic bags after the washer
•
Children should never be left alone or unattended
the area where appliances are located.
•
Washer installation and grounding must be done in
accordance with local codes by a qualified installer.
Installation instructions are included in this manual for
•
Use only low sudsing detergents suitable for front
ing washers, or a small amount of regular dete
gent. The soap suds should never exceed the mid
•
The washer must be plugged into a properly grounded
three (3) prong electrical outlet. For your safety, the
third or round grounding prong must never be
•
Repair or replacement of a part should be made only
by a qualified service technician to prevent personal
injury or damage to the machine. Ask your dealer for a
repair service companies.
•
Disconnect power to the washer at the circuit breaker
or fuse box, or unplug the machine in an emergency,
or when servicing is required. Have the installer show
oper switch or fuse at the electrical
The Appliance Should Be Connected To
An Individual Branch Circu
Wire And Protected By 15 A Fuse or Breaker.
In the accessories bag you will also find a spanner that is to be used for removing brackets and leveling washer
