Wash And Rinse Water Temperatures Are Incorrect
•
The hot water hose and cold water hose are connected
Is Entering Washer But Tub Does Not Fill
•
Standpipe for the drain hose is not the correct height.
(Fig. 2), drain hose is to far into standpipe or air break
•
Hose connections at faucet and/or machi
•
Rubber washers are not inside the metal hose
•
Drain hose not securely fastened (Fig.
pipes in the house are clogged.
•
Too much detergent or a high sudsing detergent in soft
•
may be on the door seal or gasket of the washer
Water In Washer Does Not Drain Or Drains Sl
•
Drain hose is kinked or clogged (Fig. 1).
•
Standpipe does not have a large enough diameter and
is slowing the draining process.
•
•
•
•
Detergent used is not compatible with water cond
•
Garments were pretreated, before washing.
•
Additional laundry aids such as oxygen bleach may
cause additional sudsing.
•
A certain amount of "chugging" noise is normal in a
Rattling And Clanking Noise
•
bjects such as coins or safety pins may be in
•
Foreign objects may be in the pump.
•
Belt buckles and metal fasteners ar
tub during the washing cycle.
•
Washer is not level and lock nuts may not be securely
tightened on front adjusting feet.
•
A rubber cap may be missing from one of the leveling
•
Washer may not be installed on
•
The four shipping brackets are still on the machine.
•
Heavy wash loads may produce a thumpi
the beginning of the spin cycle.
