SETTING THE DEVICE
You can setup Camera, Storage Device and Monitor.
Camera
To register a camera
You can register a network camera for each channel and make connection between.
[MENU] Ö [ENTER] Ö ▼ Ö <Menu> Ö [ENTER] Ö ▼ Ö <Device> Ö ► Ö <Camera> Ö [ENTER] Ö ▼
Ö <Cam Registration> Ö ▲▼◄► Ö [ENTER]
•
Preview : View the video of the channel as a current image.
•
Protocol : Show the protocol information of a registered network camera.
•
Model : Show the camera model name.
•
IP Address : Display the IP address of a network camera.
•
Connection : Display the connection status.
•
Data Rate : Displays the total amount of data received by the channel.
•
Performance : Displays the necessary performance occupancy rate for receiving the amount of data.
` A camera registered with the RTSP, ONVIF protocols can occupy twice the capacity of the existing amount of data.
M
` If the NVR has been initialized, it may not connect to cameras. Configure the network settings first and add cameras.
For more information on network settings, refer to "Network Configuration". (Page 76)
52_ menu setup
menu setup
