To upgrade the current software version
1. Connect a device storing the software to be updated.
` It may take about 10 seconds to recognize the device.
` Upgradeable devices include USB memory, and network device.
` To update the network, the current NVR should have been connected to the network.
Upgrade via the proxy server may not be enabled due to the restricted access.
2. Select <System Management> from <System> window.
3. Select <System Information>.
4. When the recognized device appears, select <Upgrade>.
` If you connect a device in the upgrade menu window, you can press the < > button to search for available software.
` If there is an upgrade image on the network, the popup window will appear.
` The <Upgrade> button will be activated only if the current <Software Version> of the <System Information> is same to or
older than that of <S/W Upgrade>.
5. Press <OK> in the "S/W Upgrade" window.
` While updating, it shows the progress.
6. When the updating is done, it automatically restarts.
Do not turn the power off until it finishes restarting.
M
` If "Upgrade Failed" appears, retry from the step 4.
When you experience continued failure, consult the service center for assistance.
48_ menu setup
menu setup
