Call functions
47
1. Enter the phone number you want to dial, such as a
bank’s teleservice number.
2. Press repeatedly to insert a pause.
You can insert two types of pauses:
•
p: inserts a pause of approximately two seconds
between numbers. The numbers following “p” are
sent automatically.
•
w: if you use a pause of this type, the remaining
sequence is not sent until you press
Send soft key.
3. Enter a number to be sent after the pause, such as
your account number, PIN, etc.
4. Repeat steps 2 and 3 to add more pauses and
numbers, if necessary.
5. Press to make a call.
6. After connecting, wait for a prompt from the system,
and then press at each prompt, if applicable.
The DTMF tones are sent.
