Settings
239
If there already are access points defined, to create a
new access point, select
Options
→
New access point and
select:
•
Use default settings to use the default settings. Make
the needed changes and press the
Back soft key to
save the settings.
•
Use existing settings to use existing setting
information as the basis for the new access point
settings. A list of existing access points is opened.
Select one. Access point settings are opened with
some fields already filled.
Fill in the following fields:
Notes
:
• Begin filling in the settings from the top because depending
on what data connection you select (
Bearer type
), only
certain setting fields are available.
• Follow the instructions given to you by your service provider
very carefully.
• Connection name: Enter a descriptive name for the
connection.
•
Data bearer: The options are GPRS and Data call.
Depending on what data connection you select, only
certain setting fields are available. Fill in all fields
marked with
Must be defined or with a red asterisk.
Other fields can be left empty, unless you have been
instructed otherwise by your service provider.
Note
: To be able to use a data connection, the network
service provider must support this feature, and if
necessary, activate it for your SIM card.
