21
Shooting
Setting the Date and Time (p.35-37)
q Slide the power switch and set the mode
dial to [SET UP].
w Press the or button to select [DATE
SETTING].
e Press the DISPLAY button to select the
display method.
r Press the ENTER button.
t Press the or button to change the
flashing digit.
y Press the ENTER button.
Repeat steps t and y above to complete
the settings.
* Each time you press the ENTER button,
the flashing digit changes, from year to
month, day, hour and minute.
u After you have set the number of
minutes, press the ENTER button.
CANCEL:MENU SEL.:ENTER
DATE SETTING
1999 1 1
00:00
Basic Shooting Procedure (p.40-51)
q Slide the power switch and set the mode
dial to [ ].
w Press the CARD/IN button to select
where to record.
e Press the PIC button to select a PIC
(Image quality) mode.
r Select a recording mode.
q Press the MENU button to display the
record menu and select [RECORDING
MODE].
w Press the ENTER button to select a
recording mode and then press the
MENU button to return to the original
display.
t Press the (
) or ( ) button to
select the desired size of the subject.
* Observe the position of the subject by
looking through the viewfinder or at the
LCD monitor.
y Press the shutter release button to
record the image.
1800x1200 N 1800x1200 N
12
MENU
[
SET UP
]
FORMAT
DATE SETTING :1999/1/1
KEEP SETTINGS
BEEP SOUND :ON
AUTO POWER OFF :1 MIN
LANGUAGE :ENGLISH
VIDEO OUT MODE :NTSC
VERSION
IMPRINTING MODE:DISPLAY
SEL.:ENTER
