109
Miscellaneous
5
Changing the LCD Setting
The camera comes up with the LCD monitor enabled or disabled when it is powered
on in a recording mode. You may set the camera to have the LCD monitor disabled
when it is powered on, to save the batteries.
q Set the mode dial to [ ].
The SETUP menu will open.
Note
• To cancel the operation, turn the mode
dial.
w Press the or button to select [LCD
SETTING].
e Press the ENTER button to select [OFF].
The camera, when powered on in a recording
mode, will now come up with the LCD monitor
disabled. Press the DISPLAY button to switch
the monitor display. See “LCD Monitor Display”
(p.41).
When the setting is complete, turn the mode dial
to switch to another mode.
Restoring the Setting
Select [ON] as an LCD initial display option in step e.
MENU
[
SET UP
]
LCD CONFIRMATION : 0SEC
LCD SETTING : ON
INITIALIZE SETTING
PASSWORD : OFF
SEQUENTIAL FILE NO:ON
DISPLAY POWER :OFF
SEL.:ENTER
MENU
[
SET UP
]
LCD CONFIRMATION : 0SEC
LCD SETTING : OFF
INITIALIZE SETTING
PASSWORD : OFF
SEQUENTIAL FILE NO:ON
DISPLAY POWER :OFF
SEL.:ENTER
