User Tools
219
7
Back Side Margin Ad-
just.
You can adjust the back side margin direction and width that is select-
ed as a default in “Back Side Margin Adjust.” mode.
You can change this setting.
• Metric version: left/20 mm—right/20 mm in 1 mm steps.
• Inch version: left/0.8"—right/0.8" in 0.1" steps.
Note
❒ Default:
• Metric version: left/right 0mm
• Inch version: left/right 0"
1→2 Duplex Auto
Margin Adjust.
When you use 1 Sided → 2 Sided mode, the machine sets the back side
margin automatically.
Note
❒ Default: Off
Magnification Setting Up to 2 reproduction ratios which you frequently use can be registered.
A
Press the [Setting] key.
B Select the [User Ratio 1] or [User Ratio 2] key.
C Enter your desired ratio with the number keys, and then press the
[OK] key.
Initial Mode Setting You can set the machine to recall program setting when the machine is
turned on or when modes are cleared.
Note
❒ Default: Normal
Show Editor Grid
(Option)
You can turn the grid snap on or off in the display editor. The grids
may help you to mark a right angle shape.
Note
❒ Default: Off
Area Shape Priority When you designate areas, you can select the first designated shape.
A
Select the [Rectangle], [R.A.Polygon], [Polygon], [Closed
Loop], or [Multi. Closed Loop] key.
Note
❒ Default: [Rectangle] key
B&W Copy Default:
Text
When you select the Black & White copy mode, you can select text
mode regardless of the Original Type Priority setting.
Note
❒ Default: On
Menu Description
Cat2-5_FM.book Page 219 Tuesday, February 20, 2001 9:27 AM
