Selecting Modes for Outside Designated Areas
171
5
Selecting Modes for Outside Designated
Areas
Reference
The available modes for area editing depend on the area shape. ⇒ P.182
“Combination Chart for Area Editing”.
For functions that cannot be used together in area editing, ⇒ P.182 “Combina-
tion Chart for Area Editing”.
More than one mode can be set. However, there are some limitations, ⇒ P.182
“Combination Chart for Area Editing”.
The modes that can be set for outside areas are as follows:
• Color/Image Adjustment: Image Density, Color Mode, Original Type, Im-
age Adjustment, Color Adjustment, Color Balance Adjustment
• Color Creation: Color Conversion, Color Erase, Color Background, Paint,
Type Mask
• Image Creation: Outline Image, Shadow Image, Positive/Negative
Note
❒ Color/Image Adjustment's default setting:
• Image Density - Manual Image Density
• Color Mode - Black
• Original Type - Text/Photo
❒ You can change the default settings. ⇒ P.211 “User Tools”.
❒ The way to set modes is basically the same as for the entire image. For details,
refer to each page.
• To fill an area with a selected color, select the Paint.
• Image Density (⇒ P.28 “Adjusting Copy Image Density”.)
• Original Type (⇒ P.36 “Selecting the Original Image Type”.)
• Color Adjustment (⇒ P.140 “Color Adjustment”.)
• Color Conversion (⇒ P.94 “Color Conversion”.)
• Color Background (⇒ P.97 “Color Background”.)
• Type Mask (⇒ P.99 “Type Mask”.)
• Outline Image (⇒ P.101 “Outline Image”.)
• Positive/Negative (⇒ P.114 “Positive/Negative”.)
• Color Mode (⇒ P.30 “Selecting a Color Mode”.)
• Image Adjustment (⇒ P.142 “Image Adjustment”.)
• Color Balance Adjustment (⇒ P.131 “Color Balance Adjustment”.)
• Color Erase (⇒ P.96 “Color Erase”.)
• Shadow Image (⇒ P.102 “Shadow Image”.)
• Save Area (⇒ P.169 “Save Area”.)
Cat2-5_FM.book Page 171 Tuesday, February 20, 2001 9:27 AM
