Program User Color
145
4
Program User Color
In addition to the base colors, you can store up to 15 customized colors into
memory (User Color).
Reference
For color samples, ⇒ P.11 “Color Sample Chart”.
Note
❒ There are two ways to make user colors as follows:
• Adjusting a selected base color
• Mixing colors manually with number keys
❒ Up to 15 colors can be stored.
❒ The total percentages of the mixed colors must be 255% or less.
❒ If the total percentage of the mixed color is over 255%, the copier cannot cre-
ate the color properly and the results will appear different.
❒ If the total percentage of the mixed colors is too low, it may not be bonded to
the paper properly resulting in a change in image density.
❒ The appearance of user colors might vary slightly according to the image type
you have selected (ex. Photo, Text, etc.).
Adjusting Colors Based on the Selected Color
A
Press the {
{{
{Adjustment/Memory}
}}
} key.
B
Press the [Prog. User Color] key.
Cat2-5_FM.book Page 145 Tuesday, February 20, 2001 9:27 AM
