A SERVICE OF

logo

7
2. Have a second person hold the Base (52) in the
position shown.
Identify the Right Upright (54), which has a
square hole near the lower end.
Hold the Right Upright (54) so the two round
holes are on top as shown. Attach the Right
Upright to the Base (52) with two M10 x 75mm
Bolts (2) and two M10 Star Washers (9). Do not
fully tighten the Bolts yet.
Attach the Left Upright (53) to the Base (52) in
the same way.
2
52
53
2
2
9
9
54
Square
Hole
Round Holes
Round Holes
1. Make sure that the power cord is unplugged.
Position the Base (52) and the Base Extensions
(
45) upside-down as shown.
A
ttach six Base Feet (63) to the Base (52) and
the Base Extensions (45) with six #8 x 1" Tek
Screws (26).
1
52
26
26
63
63
6
3
26
63
2
6
63
26
45
63
26
45