ProForm PFTL49909.0 Manual

A SERVICE OF

next previous

13

14. Make sure that all parts are properly tightened before you use the treadmill. If there are sheets of clear

plastic on the treadmill decals, remove the plastic. To protect the floor or carpet, place a mat under the tread-

mill. Note: Extra hardware may be included. Keep the included hex keys in a secure place; one of the hex

keys is used to adjust the walking belt (see page 23).

13. Attach the Left Crosswalk Arm (117) and a

Plastic Spacer (119) to the Left Upright (53) with

two 1/4" x 3" Bolts (111) and two 1/4" Flat

Washers (114). Make sure that the Left

C

rosswalk Arm is on the indicated side of the

console assembly.

Attach the Right Crosswalk Arm (not shown)

i

n the same way. Be careful not to pinch the

wires in the Right Upright (not shown).

111

114

13

53

117

119

C

onsole

Assembly