b
Trim the picture.
If you move the mouse pointer onto the dotted line around
the picture, the pointer changes to a symbol.Trim the
picture by pressing the left mouse button and moving the
dotted line.
When you have finished trimming, click the [Trimming] but-
ton.
n
Save the picture.
When you are satisfied with the trimmed picture, click the
[Save] button to save the picture.
To cancel trimming, click the [Cancel Trimming] button.
After saving the picture, if you have finished creating
panorama pictures, exit [ACD photostitcher] and [ACDSee].
103
Playback/Erasing/Editing
c
Adjust the position of the images.
[ACD photostitcher] starts up and the selected images are
displayed in panorama format.
If you move the mouse pointer onto an image, the pointer
changes to a symbol. Adjust the position of the images
by pressing the left mouse button and moving the images
one by one to the desired position.
When you have finished correcting the position, click the
[STITCH] button.
v
Select the type of panorama picture you want.
There are two types of panorama picture: [Big Plane] and
[Cylinder]. As the former type is used in this explanation,
click the [Big Plane] button.
A dialog box will appear. Click [OK].
102
Playback/Erasing/Editing
ባ
Click the [STITCH]
button
ቢ
Adjust the position
while pressing the left
mouse button
Click the [Big Plane]
ባ
Click the [Trimming]
button.
ቢ
Trim the picture.
Click the [Save] button.
[Cancel Trimming] button
