98
Playback/Erasing/Editing
99
Playback/Erasing/Editing
b
Click [Next] and then click [Finish].
Reboot your computer after the screen closes.
n
Turn your camera off and plug the USB cable into your
camera and into an available USB port on your computer.
m
Turn your camera on.
Your computer will automatically detect the camera as new
hardware and window will display a notification confirming
[Hardware Found : PENTAX OPTIO S] (Windows XP) or
[Search for the best driver for your device (Recommended)]
(Windows 98/98SE/ME/2000) in the task bar recognized
area to begin the installation.
,
Double click [My Computer] on the desktop.
When the installation is completed, your camera can then
be found in the [My Computer] window as [Removable
Disk].
Make sure that “ Removable Disk ” is displayed in the [My
computer] window.
• In the case of Windows XP, if the SD Memory Card/
MultiMediaCard has a volume label attached, the content of
the volume label will be displayed instead of [Removable
Disk]. If the SD Memory Card/MultiMediaCard is new and has
not been formatted, the manufacturer and capacity of the
card may be displayed.
Installing the ACDSee™
When installing the ACDSee™, recorded images can be viewed
and edited on your computer.
z
Turn on your computer.
x
Insert the CD-ROM (S-SW8) into your CD-ROM drive.
The PENTAX Software Installer screen will appear.
b
If the PENTAX Software Installer screen is not displayed
Follow the procedure below to display the screen.
1) Double click the [My Computer] icon on the desktop.
2) Double click the [CD-ROM Drive (S-SW8)] icon.
3) Double click the [Setup.exe] icon.
c
Double click your applicable language.
You can choose the language from the following: English,
French, German, Spanish, Italian and Japanese.
v
Click the [ACDSee™].
The Setup screen will appear. Follow the on-screen guid-
ance and enter the registration information. Reboot your PC
after installation finish.
Installing the ACD Photostitcher
If you have installed ACDSee™ and ACD Photostitcher in your
computer, you can join the images you have taken in Panorama
assist mode.
Make sure that the ACDSee™ has been installed.
z
Turn on your computer.
x
Insert the CD-ROM (S-SW8) into your CD-ROM drive.
The PENTAX Software Installer screen will appear.
b
If the PENTAX Software Installer screen is not displayed
Follow the procedure below to display the screen.
1) Double click the [My Computer] icon on the desktop.
2) Double click the [CD-ROM Drive (S-SW8)] icon.
3) Double click the [Setup.exe] icon.
c
Double click your applicable language.
You can choose the language from the following: English,
French, German, Spanish, Italian and Japanese.
v
Click the [ACD Photostitcher].
The Setup screen will appear. Follow the on-screen guid-
ance and enter the registration information.
The screen will return to PENTAX Software Installer. Click
the [Exit] to finish.
