SETTING UP
MAKING YOUR FIRST CALL
16
2
CHAPTER
4 Press Send to dial.
5 When prompted, press 1 (this number
appears on the E letter key) to program
your phone. A service–provisioning
message appears on your smartphone
screen.
6 Wait a few minutes until you see the
Programming Successful! message,
and then tap the onscreen OK button. If
the Ringer switch is set to Sound On
, you hear three tones when
programming is successful.
7 Press Power/End to end the call.
8 After you finish the call, press Power/
End to end the call.
Making a call
1 Press Phone .
2 Press Center to turn off Keyguard.
3 Tap the onscreen Dial Pad to enter the
number you want to call.
4 Press Send to dial the number.
5 After you finish the call, press Power/
End to end the call.
Adjusting call volume
While a call is in progress, press the
Volume button on the side of your
smartphone to adjust the call volume.
• To increase the volume, press the upper
half of the Volume button.
• To decrease the volume, press the
lower half of the Volume button.
TIP
If you are inside a coverage area and
cannot complete a call, contact Verizon
Wireless for assistance.
Gandalf_VZW_UG.book Page 16 Monday, February 25, 2008 10:50 PM
