3G18Wn User Guide YML18WNYML18WN18WN
44 www.netcomm.com.au
How To Congure Wireless Security
1. Open your web browser (i.e. Internet Explorer or Firefox) and navigate to http://192.168.20.1/.
2. Click on Login, then enter your User Name and Password (default: admin/admin).
3. Mouseover Wireless Settings and then click on Security. On this page you can congure the wireless security.
4. To use WEP, please congure the following:
• Change Security to WEP-AUTO
• Type in the key in the WEP Key 1 eld (This example uses “a1b2c3d4e5” key)
Notes: WEP key can only use numbers (0 to 9) and letters (A to F).
• Click on Save to save the settings
5. To use WPA-PSK/WPA2-PSK, please congure the following:
• Change Security to WPA-PSK or WPA2-PSK
• Change Encryption Type to TKIP for WPA-PSK or AES for WPA2-PSK
• Enter the WPA/WPA2 key in the Passphrase eld.
Notes: The key needs to be more than 8 characters and less than 63 characters and it can be any combination of letters and numbers.
• Click Apply to save the settings
Notes: Wireless client network cards must be WPA-compliant to connect to a WPA enable network, if in doubt check the wireless client network card documentation, or use WEP
security.
Notes: After changing the security settings, you might need to remove the current wireless settings on the computer and recongure the wireless computer according to the new
settings.
