3G18Wn User Guide YML18WNYML18WN18WN
24 www.netcomm.com.au
Advanced
This page allows you to modify the advanced wireless settings for your 3G Router. These settings should not be changed unless you are
aware of what effect they will have.
Name Description
Beacon Interval: Interval of time the wireless router broadcasts a beacon, used to synchronize the wireless network.
Data Beacon Rate (DTIM): Enter a value between 1 and 255 for the Delivery Trafc Indication Message (DTIM). A DTIM is a
countdown informing clients of the next window for listening to broadcast and multicast messages
Fragment Threshold: This species the maximum size of a packet during the fragmentation of data to be transmitted. If you
set this value too low, it will result in bad performance.
RTS Threshold: When the packet size is smaller than the RTS threshold, the wireless router will not use the RTS/CTS
mechanism to send this packet.
AP Isolation: This feature allows you to isolate clients on your wireless network. To enable communication between
the wireless clients connected to your 3G Router, select Disabled. To cut the communication between
the wireless clients, please choose Enabled.
TX Power: This determines the output power of the antenna
WMM Capable: WMM (Wi-Fi Multimedia) if enabled supports QoS (Quality of Service) for experiencing better audio, video
and voice in applications
WMM Parameters: Click on the WMM Conguration button to congure the WMM parameters
Broadcast Network Name (SSID): Select ‘Disabled’ to hide the SSID of your 3G Router. If disabled, other people will not be able scan and
detect this product’s SSID.
Click Apply to save the settings.
