YML18WN 3G18Wn User Guide18WN 3G18Wn User Guide 3G18Wn User Guide3G18Wn User Guide
www.netcomm.com.au 11
NetComm Liberty Series - 3G Wireless N300 Router
Modem Requirements
In order to use the WAN Ethernet port for Internet Connectivity your xed line service (Cable/xDSL/Satellite) modem must be equipped with
a RJ45 Ethernet port. Many modems have both a RJ45 Ethernet port and a USB connection. If you have a modem with both Ethernet and
USB, and are using the USB connection at this time, you will be instructed to use the RJ45 Ethernet port during the installation procedure.
If your modem has only a USB port, you can request a different type of modem from your ISP, or you can purchase a modem that has an
RJ45 Ethernet port on it.
Connecting your 3G Router
Step 1 – Connect the USB 3G Modem.
Plug the USB 3G modem into the USB port.
3G USB Modem
Note: The 3G18Wn - 3G Wireless N300 Router is designed to work with 3G USB Dongles that can be used as data modems (support tethered data). Please refer to your service
provider for detailed feature information. Please refer to the NetComm website for a list of compatible 3G USB Modems
Step 2 – Connect a computer
Connect one end of the Ethernet cable into a LAN Port on the back panel of the 3G18Wn - 3G Wireless N300 Router, and the other end
into an available Ethernet port on the network adapter in the computer you will use to congure the unit.
Step 3 – Plug in the power
Connect the power adapter to the port on the back panel of your 3G Router. Then plug the other end of the power adapter into a wall
outlet or power strip.
Power Adapter Power Point
