Using a Docking Station
>
13
Restart the system by clicking on OK in the warning
> dialog box.
Setting to 2-Channel IDE Mode
1
Open the ThinkPad Configuration program.
2
Click on the Docking Station ( ) button.
* The “Docking station” window appears.
*
3
Click on the Device Manager... button.
* The “System Properties” window appears.
*
4
Click on Computer; then click on the Properties button.
*
5
Determine an available IRQ value other than IRQ 11 by
* checking the current setting under the View Resources
* tab. If there is no available IRQ value, remove a device
* that is not currently being used by clicking on the device
* and the Remove button under the Device Manager tab.
*
6
Click on OK to close the “System Properties” window.
*
7
Return to the “Docking station” window; then click on the
* IRQ Holder for PCI Steering tab.
*
8
Change the IRQ value in 1st IRQ to the available value
* you determined in step 5.
>
9
Click on the IDE Device tab.
>
10
Select Enable in the UltraslimBay IDE device in the
> docking station list box.
> The third IDE is automatically selected.
>
11
Select Second in the IDE Channel list box.
>
12
Click on the Disable Devices button in the warning
> dialog box.
Chapter 2. Extending the Features of Your Computer 87
