A SERVICE OF

logo

ENWW
Loading input trays 17
1
1
Note
Depending on the size that you selected, the MFP might prompt you to
move the Custom/Standard switch in the tray to another position. The MFP
might also prompt you to move the paper guides. Follow the instructions on
the control panel, close the tray, and then repeat this procedure starting
with step 7.
9 To change the type setting, touch the correct paper type. The message
SETTING SAVED is displayed for a moment, and then the size and type
settings are displayed.
Note
If you are using media that is lighter or heavier than 75 g/m² to 105 g/m² (20
to 28 lb), or if you are using coated media or transparencies, set the media
type for the tray.
10 If the size and type settings are correct, touch E
XIT to accept the settings.
The tray is ready to use.