Next Available Options:
■ basicTlvEnable < port_descr | system_name | system_descr | ... > -- Specify the Basic TLV List
to be advertised. (NUMBER) (p. 354)
■ ipAddrEnable -- Set IP ADDR to be enabled.(p. 357)
■ dot1TlvEnable -- Specify the 802.1 TLV List to be advertised.(p. 356)
■ medTlvEnable < capabilities | network_policy | location_id | ... > -- Specify the MED TLV List to
be advertised. (NUMBER) (p. 357)
■ medPortLocation -- Configure location-id information to be advertised. (p. 357)
■ dot3TlvEnable < macphy_config > -- Specify the 802.3 TLV List to be advertised. (NUMBER)
(p. 356)
COUNTRY
■ lldp config [ETHERNET] PORT-LIST medPortLocation civic-addr COUNTRY
Specify the Country Code of two characters.
Next Available Option:
■ WHAT -- Specify the 'what' number of range <0-2>. (NUMBER) (p. 359)
dot1TlvEnable
■ lldp config [ETHERNET] PORT-LIST dot1TlvEnable
Specify the 802.1 TLV List to be advertised.
Next Available Option:
■ vlan-name -- Specify that the VLAN name TLV is to be advertised. (p. 359)
dot3TlvEnable
■ [no] lldp config [ETHERNET] PORT-LIST dot3TlvEnable < macphy_config >
Specify the 802.3 TLV List to be advertised.
Supported Values:
■ macphy_config -- MAC Physical Config Tlv
elin-addr
■ [no] lldp config [ETHERNET] PORT-LIST medPortLocation elin-addr
Specify the elin address location to be advertised.
Next Available Option:
■ addr -- Specify the Location name to be advertised. (OCTET-STR) (p. 353)
enable-notification
■ [no] lldp enable-notification [ETHERNET] PORT-LIST
Usage: [no] lldp noticationEnable <PORT-LIST>
Description: Set the port for which notication should be enabled.
356© 2009 Hewlett-Packard Development Company, L.P.
lldpCommand Line Interface Reference Guide
