Set dead interval in seconds; the default is 40.
Range: < 1 to 65535 >
■ interface vlan VLAN-ID ip ospf IP-ADDR dead-interval < 1 to 65535 >
Set dead interval in seconds; the default is 40.
Range: < 1 to 65535 >
■ interface vlan VLAN-ID ip ospf all dead-interval < 1 to 65535 >
Set dead interval in seconds; the default is 40.
Range: < 1 to 65535 >
dhcp
■ [no] interface vlan VLAN-ID ipv6 address dhcp
Congure a DHCPv6 client.
Next Available Option:
■ full -- Obtain IPv6 address & Configuration information from DHCPv6 server.(p. 235)
■ [no] interface svlan VLAN-ID ipv6 address dhcp
Congure a DHCPv6 client.
Next Available Option:
■ full -- Obtain IPv6 address & Configuration information from DHCPv6 server.(p. 235)
dhcp-bootp
■ interface vlan VLAN-ID ip address dhcp-bootp
Congure the interface to use DHCP/Bootp server to acquire parameters.
■ interface svlan VLAN-ID ip address dhcp-bootp
Congure the interface to use DHCP/Bootp server to acquire parameters.
dhcp-snooping
■ interface [ETHERNET] PORT-LIST dhcp-snooping
Usage: [no] dhcp-snooping trust
Description: Congure the port as trusted or untrusted. Only DHCP server
packets received on trusted interfaces will be forwarded.
By specifying 'no' the port will be congured as untrusted.
The default state is untrusted.
Next Available Option:
■ trust -- Configure trusted interfaces(p. 279)
■ [no] interface vlan VLAN-ID dhcp-snooping
■ [no] interface svlan VLAN-ID dhcp-snooping
230© 2009 Hewlett-Packard Development Company, L.P.
interfaceCommand Line Interface Reference Guide
