Chapter 4 Control Panel Functions
4-11
4.8 Paper Menu
Note: It is important in order to maximize the life and reliability of both the
printer and consumables that the media type setings in the menu matches the type of
media which is present in the tray. In addition some media types cannot be fed from
the optional tray 2 or be used with the optional duplex unit.
The Paper Menu provides access to the printer settings for various paper-han-
dling functions. Use the following procedure to enter the paper menu:
1. Press the MENU button on the control panel.
2. Press the NEXT button until the text “Paper Menu” is shown on the sec-
ond line of the display.
3. Press the SELECT button to enter the Paper menu.
4. Press the NEXT button to move through the submenus.
5. Use the procedures in the following table to access and change the printer
paper-handling settings:
Submenus Default Setting Available Settings Procedure for Changing Setting
Copies
This submenu allows you to
change the number of
copies printed.
1 Numbers 1 – 999 1. Press NEXT or PREVIOUS to
increase or decrease the
number of copies printed.
2. Press SELECT to save this
setting.
Duplex
This submenu allows you to
turn the duplex on or off.
Off On/Off 1. Press NEXT or PREVIOUS to
toggle between ON and OFF.
2. Press SELECT to save this
setting.
Duplex Bind
This submenu allows you to
choose between LEF (Long
Edge Feed) and SEF (Short
Edge Feed).
Long Edge feed Long Edge/Short Edge 1. Press NEXT or PREVIOUS to
toggle between Long Edge
and Short Edge.
2. Press SELECT to save this
setting.
Default Source
This submenu allows you to
choose a default paper
source from a list of all
installed sources.
Tray 1 Tray 1
Tray 2 (optional)
1. Press NEXT or PREVIOUS to
scroll through the list of
available sources of paper.
2. Press SELECT to set a source
as the default.
