Page 192 Advanced HotSync® Operations
Conducting a HotSync operation
via a network
When you use the Network HotSync software, you can take
advantage of the Local Area Network (LAN) and Wide Area Network
(WAN) connectivity available in many office environments. The
Network HotSync software enables you to perform a HotSync
operation by using the WAN to dial-in to a network or by using a
cradle that is connected to any computer on your LAN (provided that
the computer connected to the cradle also has the Network HotSync
software installed, your computer is on, and the HotSync Manager is
running).
Connecting to your company’s dial-in server
The Network HotSync software requires the following:
■ Your computer has TCP/IP support installed.
■ Both your company’s network system and its remote access server
support TCP/IP. (Your System Administrator has this
information.)
■ You have a remote access account. (If you don’t have an account,
consult your System Administrator.)
Everything you need to connect to your company’s dial-in server
(network modem) is included with Palm Desktop software and
handheld software. You need to activate the feature, however, on both
Palm Desktop software and your handheld.
To prepare your computer for a network HotSync operation:
1. Click the HotSync Manager icon in the Windows system tray
(bottom-right corner of the taskbar).
2. From the HotSync Manager menu, choose Network.
Note: To perform a Network HotSync from another computer
