50 Audiometric Test Screen WinCHAP User’s Manual
The Audiometric Curves window contains the graphical display of this data
while the Curve Data Values and Speech Audiometry windows contain the
numerical displays.
Figure 5.2—Audiometric curves
In the Audiometric Curves graphical display, these curves are listed in a leg-
end below each graph. There is a box next to each curve. Selecting a curve will
mark the box with an “x” and display the curve on the graph. Deselecting the
curve will turn off its display but will not delete it.
5.2.1 Capturing tests from the audiometer
The Connect button is used to establish a real-time connection between your
audiometer and your computer. When you use it, you will operate the audiom
-
eter as usual by using its knobs and buttons. Whenever you push the stimulus
button on your audiometer, the graph marker on your WinCHAP display will
automatically be updated with the selected frequency and amplitude. The type
of test that is recorded is dependent upon the position of the input and output
dials on your audiometer. See Table 5.2.1.
Note: The
Connect button is NOT used to remotely control the audiometer from
the computer. See Section 5.2.4 for more details.
