8 Configuration WinCHAP User’s Manual
We are constantly updating our website to contain our latest product features as
well as any supplementary instructional information available. WinCHAP pre
-
fers to use Internet Explorer for opening the Frye Website.
Shortcut: Type Ctrl+W from the Main Menu to go directly to the Frye website.
2.1.3 Checking your FONIX analyzer connection
You can check your FONIX analyzer connection from the Main Menu:
1. Open the
Settings menu.
2. Point to
Communications.
3. Click Check Analyzer. This will display the status of your analyzer’s con
-
nection to your computer at the bottom of the Main Menu.
Shortcut: Type Ctrl+M from the Main Menu to check your analyzer’s connection.
2.1.4 Getting basic WinCHAP information
You can get basic Frye contact information, WinCHAP’s software version, and
your product’s serial number in the About WinCHAP window.
Open the
About menu in the Main Menu and click About WinCHAP. This will
open the About WinCHAP window.
2.1.5 Setting your analyzer’s internal printing label
WinCHAP can change the label used when performing a print screen from your
analyzer.
1. Open the
Settings menu.
2. Point to
Communication.
3. Point to Analyzer Tools
.
4. Click
Set Label. This will open the Analyzer Label Settings window.
5. Fill in the lines as you would like them to appear on your analyzer print
-
outs.
6. Click
Set. This will save the displayed label, even when you reboot your
analyzer.
7. Click
Back to close the Analyzer Label Settings window.
To return the label to the factory setup, follow the same instructions, but click
Restore
.
