QGE 100 • Software Configuration and Control 38
Tools menu
Option Description
Mouse & Keyboard Toggles mouse and keyboard control on and off (see “Mouse
and Keyboard Control of the Source Computer” on
page 41).
Mouse and Keyboard
Options
Opens a window that lets you set some parameters for
keyboard and mouse control of the source PC.
Options
Opens a window that lets you specify whether explanatory
messages (learning dialogs) appear when you initiate certain
actions.
Logging
Opens a window that lets you enable or disable multicast error
logging and set an interval at which to check for errors.
About menu
Option Description
About QGE 100 Viewer Displays a window containing the QGE 100 Viewer copyright
date and software version number.
Connecting to a QGE 100 Source
For you to view a source using the QGE 100 Viewer program, the software must be
connected to the QGE 100 to which the source is attached. (You can also view sources
using the Viewer window of the Administrator software [see “Using the QGE 100
Administrator Program” on page 19].)
If the connection is successful, the source for the selected QGE is displayed in the left
pane. If no source computer is connected to the selected QGE, the window displays the
message No Source or Not Connected.
TIP: If the source does not appear, refresh the list (see “Refreshing the Channel
List”on page 39).
Connecting using the Channel list
To connect to a QGE 100 on the Channel list (right pane of the QGE 100 Viewer window):
1. From the Channel list, select a QGE by clicking on its name to highlight it.
2. Connect the QGE 100 Viewer software to the selected QGE by any of the following
methods:
• Click the Connect button on the toolbar.
• Double-click the name of the QGE on the Channel list.
• Select Connect from the Connection menu.
