3-19
MVX Plus 128 VGA Matrix Switchers • Operation
PRELIMINARY
Example 5: Grouping inputs and outputs
In the following an example, several switcher inputs and outputs are assigned to
groups. The steps show the front panel indications that result from your action.
1. Press and release the Esc button (fi gure 3-28).
C O N T R O L
PRESET
ENTER
ESCVIEW
Press the Esc button to clear all selections.
The button flashes once.
Figure 3-28 — Clear all selections
2. To enter I/O Group mode, press and hold the Input 1 and Output 1 buttons for
approximately 2 seconds and then release the buttons (fi gure 3-29).
1
1
1
2
3
3
1
2
3
Press and hold the Input 1
button and Output 1 button.
Release the Input 1 button
and Output 1 button.
Ungrouped input and
output buttons light.
2 seconds
Figure 3-29 — Select I/O Group mode
3. Press and release the Enter button to select group 1 (fi gure 3-30).
C O N T R O L
PRESET
ENTER
ESCVIEW
Press and release the Enter button to select group 1.
The button lights amber to indicate the selection.
1324Group #
Figure 3-30 — Select an I/O group
4. Press and release the input 1 through 4 and output 1 through 4 buttons
(fi gure 3-31).
INPUTS
1
2
3
4
5
6
7
8
9
OUTPUTS
1
2
3
4
5
6
7
8
Press and release the Input 1 through Input 4 buttons.
The selected buttons light.
Press and release the Output 1 through Output 4 buttons.
The selected buttons light.
Figure 3-31 — Assign inputs and outputs
