EPSON EPL-N2700 Rev. A
Chapter 4 Disassembly/Assembly 96
4.2.4.2 Transfer Unit Removal
1. Release two hooks securing the Transfer Unit to the vertical
transport door and lift the Transfer Unit a little.
2. Disconnect the harnesses for the Timing Clutch and Timing Roller
Front Sensor from the corresponding connectors. Then remove the
Transfer Roller Unit from the vertical transport door.
Figure 4-11. Transfer Unit Removal
4.2.4.3 Timing Roller Front Sensor Removal
1. Remove the Transfer Unit. (See Section 4.2.4.2.)
2. From the back of the Transfer Unit, release the hooks securing the
Timing Roller Front Sensor to the sensor bracket, then remove the
Timing Roller Front Sensor.
Figure 4-12. Timing Roller Front Sensor Removal
CAUTION
Since the harnesses are short, disconnect the harness
holding up the Transfer Unit, and then remove the
Transfer Unit.
