Laser Beam
To avoid permanent eye dama
e, follow these directions;
Before startin
ay service procedure, switch off the printer power
and unplu
the power cord from the wall outlet.
Do not disassemble the ROS Assembly or any laser component
that displays Laser Warnin
Sticker.
Use caution when you are workin
around the ROS Assembly or
when you are performin
laser related repair procedures.
Do not disassemble the printer in such a way that the laser
beam can exit the printer en
ine durin
a print cycle.
Safety Component
Make sure fuses, interlock switches, covers, and panels are all
functionin
properly after you have reinstalled or replaced them.
Warning/Caution Label
WARNING and CAUTION labels are stuck on dan
erous parts in the
printer to make you aware of the potential dan
ers that are present
when you are workin
with those parts.
The laser beam used for exposing process during
printing is a very powerful, straight, narrow beam of
light that produces extreme heat at its focal point. The
laser beam is this printer is invisible. Although you
cannot see the beam, it can still cause severe damage.
Direct eye exposure to the laser beam may cause eye
injury or blindness. Never place a mirror or a reflective
tool or object in the laser beam path.
