A SERVICE OF

logo

EPSON EPL-N2700 Rev. A
Chapter 4 Disassembly/Assembly 108
4.2.16 High Voltage Unit Removal
1. Remove the Top Cover. (See Section 4.2.11.)
2. Open the vertical transport door.
3. Remove two screws (3504) securing the High Voltage Unit Cover to
the printer frame, and remove the cover.
4. Disconnect harnesses from the connector on the High Voltage Unit.
Figure 4-28. Harness Removal
5. Remove two screws (3501) securing the High Voltage Unit to the
printer frame.
Figure 4-29. High Voltage Unit Removal