
EPL-N2700 Revision A
Product Description Panel Operation 39
LC1 to LC3 Type
These are basically same as the MP Type but because special paper
cannot be fed from the LC1 - LC3, “Letterhead”, “Bond”, “Transprnc”,
and “Labels” can not be selected.
Paper Source
The priority for selecting the paper source is in the order of MP Tray >
LC1 > LC2 > LC3. (Applicable when “MP Tray Mode” is set to “Normal”.)
The combination of the optional paper sources and the name during the
selection is as shown in the below:
Table 1-29. Combination of the Optional Paper Cassette and
Corresponding Names
*: Large Capacity Lower Cassette
Multibin
The values that can be selected for the “Out Bin” in the “Printing Menu”
vary depending on the selection made for the “Multibin” in “Setup Menu”
as shown in the following table:
Table 1-30.
“Multibin” Settings and Corresponding Outbins Available
NOTES:
1. When an optional unit is installed, the standard Face-down can no be used. So,
“Face-down” in this case means another device.
2. If any item which can not be selected due to operation mode of the Outbin is
selected by the EJL or ESC/Page command, the selection is ignored,
3. If Face-down is selected in the 5-bin or 10-bin mailbox mode, paper is output to
Mailbox 1.
Output Tray Selection Specifications
<5-bin unit>
When “Multibin = Stacker” and “Outbin = Stacker” are selected:
The sequence of outbin destinations is Bin2 > Bin3 > ---> Bin 5 >
Bin1.
The printer searches some consecutive empty bins in the order
of Bin 5 - Bin 2, and paper will be output to the empty bin which
found last in the search.
<10-bin unit>
When “Multibin = Stacker” and “Outbin = Stacker” are selected:
The sequence of outbin destinations is Bin10 > Bin9 > ---> Bin 2
> Bin1
MP Tray LC1 LC2 LC3 Remarks
Standard Standard --- --- No option installed
Standard Standard
500-sheet
cassette unit
---
One 500-sheet cassette
unit installed
Standard Standard
500-sheet
cassette unit
500-sheet
cassette unit
Two 500-sheet cassette
units installed
Standard Standard LCC * --- LCC installed
Standard Standard
500-sheet
cassette unit
LCC *
One 500-sheet cassette
unit and LCC installed
Mailbox Sorter Multisort Stacker
Without option Face-down Face-down Face-down Face-down
5-bin unit
Face-down,
Mailbox 1,
Mailbox 2 - 5
Face-down,
Sorter
Face-down,
Sorter
Face-down,
Stacker
10-bin unit
Face-down,
Mailbox 1,
Mailbox 2 - 10
Face-down,
Sorter
Face-down,
Sorter
Face-down,
Stacker