9-2 Special Features Chapter 9
Special Dialling
Dialling an Overseas Number (With Pauses)
When you dial or register an overseas number, you may need to insert a pause within
and/or after the number. The length and location of the pause depends on the
telephone system of your country.
Follow this procedure to dial an overseas number with pauses:
1 Open the document tray.
2 Adjust the document feed lever for the
document you are loading. (1 p. 4-2)
3 Prepare the document and load it, face
down, in the ADF. (1 p. 4-4)
• For colour sending, press Colour/B&W to
(Currently used memory)
turn on its light. (1 p. 7-2)
• To adjust the resolution and contrast,
1 pp. 7-3, 7-4.
(Standby to scan)
4 Use the numeric buttons to dial the
Ex:
international access code.
• If you enter the wrong number, press Stop,
then enter the correct number.
• For details on international access codes,
contact your local telephone company.
5 If necessary, press R/Pause to enter
Ex:
a pause.
• A pause entered within a number (p) is two
seconds* long.
• For a longer pause, press R/Pause again for
another two-second* pause. Alternatively, you
can change the length of the pause.
(1 MID PAUSE SET, p. 14-6)
TEL= 00P
TEL= 00
DOCUMENT READY
MEMORY USED 0%
*Four seconds in the UK and Hong Kong.
