BIL-JAX 2622T
42
Error Message
Displayed
Error Explanation &
Possible Causes
What To Check &
Corrective Action To Clear
Error
061 OPEN CIRCUIT
ENGINE THROTTLE
The Lower Control has detected an open circuit on the
Engine Throttle relay output when it was energized during
startup self diagnostics.
NOTE: A load of less than 70mA will be detected as an
open circuit. This load is less than 70mA and this error is
suppressed to avoid false errors.
Possible causes include:
1. Faulty Engine Throttle relay wiring
2. Faulty Engine Throttle relay
3. Faulty Lower Control
1. Repair or replace Engine Throttle relay
wiring
2. Replace Engine Throttle relay
3. Replace Lower Control
062 SHORTED CIRCUIT
ENGINE THROTTLE
The Lower Control has detected excessive current on the
Engine Throttle relay output when it was energized during
startup self diagnostics.
Possible causes include:
1. Faulty Engine Throttle relay wiring
2. Faulty Engine Throttle relay
3. Faulty Lower Control
1. Repair or replace Engine Throttle relay
wiring
2. Replace Engine Throttle relay
3. Replace Lower Control
063 OPEN CIRCUIT
ENGINE STARTER
The Lower Control has detected an open circuit on the
Engine Starter relay output when it was energized during
startup self diagnostics.
NOTE: A load of less than 70mA will be detected as an
open circuit. This load is less than 70mA and this error is
suppressed to avoid false errors.
Possible causes include:
1. Faulty Engine Starter relay wiring
2. Faulty Engine Starter relay
3. Faulty Lower Control
1. Repair or replace Engine Starter relay
wiring
2. Replace Engine Starter relay
3. Replace Lower Control
064 SHORTED CIRCUIT
ENGINE STARTER
The Lower Control has detected excessive current on the
Engine Starter relay output when it was energized during
startup self diagnostics.
Possible causes include:
1. Faulty Engine Starter relay wiring
2. Faulty Engine Starter relay
3. Faulty Lower Control
1. Repair or replace Engine Starter relay
wiring
2. Replace Engine Starter relay
3. Replace Lower Control
065 OPEN CIRCUIT
ENGINE CHOKE
The Lower Control has detected an open circuit on the
Engine Choke relay output when it was energized during
startup self diagnostics.
NOTE: A load of less than 70mA will be detected as an
open circuit. This load is less than 70mA and this error is
suppressed to avoid false errors.
Possible causes include:
1. Faulty Engine Choke relay wiring
2. Faulty Engine Choke relay
3. Faulty Lower Control
1. Repair or replace Engine Choke relay
wiring
2. Replace Engine Choke relay
3. Replace Lower Control
066 SHORTED CIRCUIT
ENGINE CHOKE
The Lower Control has detected excessive current on the
Engine Choke relay output when it was energized during
startup self diagnostics.
Possible causes include:
1. Faulty Engine Choke relay wiring
2. Faulty Engine Choke relay
3. Faulty Lower Control
1. Repair or replace Engine Choke relay
wiring
2. Replace Engine Choke relay
3. Replace Lower Control
