Filter
Top Products
SPI-4.2 v8.5 Getting Started Guide www.xilinx.com 31
UG154 March 24, 2008
Implementation and Simulation Scripts
R
simulation/timing
The timing directory contains timing simulation scripts provided with the core.
Implementation and Simulation Scripts
The implementation script is either a shell script or a batch file that runs the example
design through the Xilinx tool flow. The scripts are located in the following directory:
<proj_dir>/<component_name>/implement/
The implementation scripts are parameterized based on the Design Entry Tool and Design
Entry Language CORE Generator project options. If either of these project options are
changed, the core must be regenerated to create the appropriate implementation scripts.
Table 4-9: Timing Directory
Name Description
<project_dir>/<component_name>/simulation/timing
simulate_mti.do
ModelSim macro file that compiles the
post-par timing netlist and demo HDL
source. The script also loads and runs the
simulation for 8 μs. The implement script
must first be run to generate the post-par
timing simulation model. Simulation can
only be run after the timing simulation
model is generated.
wave_mti.do
ModelSim macro file that opens a wave
window and adds key signals to the wave
viewer. The wave_mti.do file is called by
the simulate_mti.do macro file.
simulate_ncsim.sh
simulate_ncsim.bat
Shell scripts that compile the functional
netlist and loopback HDL source. The
script also launches NCSIM and runs the
simulation for 8 μs.
wave_ncsim.sv
A NCSIM macro file that opens a wave
window and adds key signals to the wave
viewer. The wave_ncsim.sv file is called by
the simulate_ncsim.sh or
simulate_ncsim.bat file.
simulate_vcs.sh (verilog only)
Shell script that compiles the structural
netlist and example design. The script also
runs the functional simulation using VCS.
vcs_session.tcl (verilog only)
VCS tcl script that opens a wave window.
This macro is called by the simulate_vcs.sh
script.
vcs_commands.key (verilog only)
VCS command file. This file is called by the
simulate_vcs.sh script.
Back to Top