Filter
Top Products
1 O-4. Tare Function Procedures
There are two kinds of tare subtraction procedures, one is “Direct tare”, another is “Preset tare”.
-f Direct Tare Subtraction
Mode SW. (1): WEIGH or FIX
Mode SW. (2): MANUAL
1
(1) Place tare weight on the platter.
(2) Press q
(3) Start the weighing or fix price
operation.
(4) The label is issued.
(5) Remove the article
tare.
together with
WEIGHT
[c.ssl
[I
‘+ NET
NOTE: Tare weight subtraction is available with up to 30 Ibs. When tare weight subtraction is in
operation, however, the scalable range for net weight becomes less by the amount of the tare.
(Net weight = Gross weight - Tare weight)
NOTE: When the tare weight exceeds 0.20 Ibs with the Mode SW.(2) set to AUTO position, one tare
label will be issued automatically. To prevent this, set the Mode SW. (2) to MANUAL position.
- 14 -