EMl-31055
INTRODUCTION
We
thank you very much for purchasing the TEC Electronic SL66 Series Scale.
This series has been designed with TEC reliability to offer a cost efficient system for a modest
investment.
The SL66 (with thermal printer)
takes advantage of the latest
technology in microprocessors. Because
of this, the decreased cabinet size permits the system to
be
placed
virtually anywhere in your store.
Your deli
and specialty departments can enjoy these high quality reliable TEC products. Improve your
operating effectiveness and watch the increased utilization of your front end scanning investment. This
electronic
Load Cell scale eliminates all moving parts and furnishes an accurate digital display of all
information.
We believe that your needs will now be fully satisfied, and you will have total reliability in price
calculation. Should you have any questions concerning the scale, please refer to this manual. Be sure
to keep this manual for future reference.
PRECAUTIONS
1. DON7 SUBJECT the weighing
platter to SUDDEN SHOCKS.
4. NEVER USE THINNER OR OTHER
VOLATILE SOLVENT for cleaning.
2. DON’T PRESS THE KEYS TOO
HARD.
Keys will operate correctly if they
are merely touched lightly.
5. DON‘T POUR WATER directly on
scale
7. When in use, avoid locations subject to vibration and direct sunlight.
4
3. Clean the cover and platter by
wiping with a dry cloth or a
cloth soaked with detergent
and wrung out thoroughly.
6. To ensure the scale is operat-
ing correctly, place a known
weight on the platter and
check for correct cornouting.
8. After the end of daily work, turn
the power OFF, then clean and
inspect the exterior of the scale
to allow you to use the scale at
its best condition.