Filter
Top Products
EMl-31055
7. LEVEL ADJUSTMENT
Set the scale on a stable and level surface. Level
the scale by turning the adjustable legs so that
the air bubble is inside the center circle.
Level Gauge
Correct
Incorrect
When the air bubble moves toward the left side,
When the air bubble moves toward rear, turn the
turn the right adjustable legs clockwise,
front adjustable legs clockwise.
8. CLEANING THE PRINT HEAD
If the print head is dirty, clear printing will not be produced. It is recommended to clean the head with
the thermal head cleaner every day before starting operation using the following procedure:
Then push the head-up lever in the direction
indicated by the arrow.
diagram with the thermal head cleaner.
Then set the label cassette, and push down the
print head.
NOTE: Be careful not to damage the print head
when cleaning.
. Thermal Head Cleaner
-8-