Filter
Top Products
EMl-31055
6. CONTROL LOCK
The control lock has seven marked positions.
There are two control keys which will operate these locks.
Manager Key
This key (MA) will access the
PROG/CMT, REG, M. DOWN.
and REWRAP positions.
SE Key
This key (SE) will access all
seven positions.
Each of the following positions on the control lock serves a different function.
PROG. CMT. ~ With the manager key in this position, it is possible to program data in the PLU
file, Store Address, Message, Printing Position, Date, Time, Initial Set, and Bar
Code Format, etc., may also be programmed.
REG.
These positions are the normal control lock positions which allow the issuance
of printed labels.
M.DOWN ~
In the Markdown position, it is possible to designate an item for discount pricing.
REWRAP I___
In the Rewrap position, it is possible to designate an item for rewrapping products.
X (Read) - This posi’tion is used to read all the accumulated sales totals stored in the unit.
These totals include individual item totals, group totals, hourly totals, and the entire
file totals.
2 (Reset) - This position is used to reset all item file totals.
-7-