Filter
Top Products
QUICKIE S-11 SERVICE MANUAL
PAGE 18
2005SUNRISE MEDICAL
Disassembly/Reassembly, and Adjustment (cont)
Disassembly
a. Remove all the zip ties on the base frame.
b. Unwrap all the wire loom ties securing the harness to the
frame.
c. For the main harness, remove the two screws that hold-
ing
the female beau plug (figure A4.22).
d. Remove the circuit breaker locking nut and push it
through the bracket (figure A4.23), then remove the main
wire harness.
e. For the light and A/C harness, remove the rear shroud
(figure A4.24)
and then remove the mounting screws on the A/C plug
bracket.(figure A4.23).
f. Push the light harness through the bracket.
g. Pull the A/C harness through the bracket.
Reassembly
a. Reverse above instructions.
Adjustment
Note: The circuit breaker can be removed without removing
the main harness.
a. Pull the quick disconnect terminal out from the bottom of
the circuit breaker, then remove the circuit breaker locking
nut.
A4.22
A4.23
A4.24
Step 9 - Wire Harness