Filter
Top Products
QUICKIE S-11 SERVICE MANUAL
PAGE 12
2005SUNRISE MEDICAL
Disassembly/Reassembly, and Adjustment (cont)
Disassembly
a. Pull the left spring loaded release pin to disengage
post (figure A4.5). While holding the left spring loaded
release pin, remove the seat post.
d. Pull out the three remaining quick release pins, remove
all other seat posts (figure A4.6).
Reassembly
a. perform the reverse of instructions above.
Step 2 - Seat Posts
A4.5
A4.6
Adjustment
Note: There is a setscrew in each “saddle” of the front
seat post brackets that can adjust the free play of the
seat frame in the bracket. Adjustment of this part is
accomplished by using a 3 mm Hex wrench. After
adjustment, ensure that the latching levers are fully
seated and the locking pin can be installed see
(fi gure A4.4).
A4.4