Filter
Top Products
34
930317 Rev. C
IX. SET UP, ADJUSTMENT & USE
M.CHECK-OUT
Once the wheelchair is assembled and
adjusted, it should roll smoothly and
easily. All accessories should also
perform smoothly.
After the wheelchair has been set up be
sure the chair performs to your specified
operational settings (see pages 35-38). If the
chair does not perform to specifications,
turn the wheelchair OFF immediately and
reprogram operational specifications.
Repeat this procedure until the
wheelchair performs to specifications
before attempting active use of the
wheelchair.
If you have any problems, follow these
procedures:
1. Review the set-up and check-out
section and operating guide to make
sure chair was properly prepared.
2. If your problem persists, contact
your authorized supplier.
If you still have a problem after
contacting your authorized supplier,
contact Sunrise customer service.
See the introduction page for details
on how to contact your authorized
supplier or Sunrise customer service.