Filter
Top Products
33
930317 Rev. C
IX. SET-UP, ADJUSTMENT & USE
K. SUSPENSION SEAT
There are three spring rates to choose
from for the Quickie P300 suspension
seat: Light for riders weighing 100-150 lbs.
Medium for riders weighing 150-200 lbs.
Heavy for riders weighing 200-250 lbs.
1. Suspension Spring Adjustment
The suspension seat is shipped from Sunrise
with no preload placed on the spring.
a) To reduce stiffness turn nut (B) clockwise.
2. Limited Weight Adjustments
Limited weight adjustments can be made by:
a) Remove the lower bolt nut (C ) from
the spring shock assembly.
b) Reposition the bolt/nut in one of several
holes provided in the motor plate.
Note: To avoid seating problems do not over
adjust the anterior tilt.
3. Controller Access
Access to the controller and other items
located under the seat can be achieved by:
a) Remove bolt (C ) from both sides
of the chair.
b) Tip seat frame forward.
Note: Reposition the joystick so it does not
hit other parts of the chair.
L. WHEEL LOCKS
Wheel locks are installed by Sunrise when
requested on the Quickie P300.
Use a torque setting of 100 in./lbs when
setting up or adjusting wheel locks.
1. Adjustment
a) Loosen the screw on the side of each
clamp. Do not remove the screw.
b) Slide assembly toward rear wheel until
clamp embeds into tir
e to pr
e
vent wheel
movement, when in locked position.
c) Tighten screws.
B
C