Filter
Top Products
An acoustic signal confirms that the
entry is correct
Incorrect entries are indicated by means
of five acoustic signals in swift sucession.
Please check that your entry is correct. If
necessary, cancel the command sequence
by pressing the ”CI” key.
Loading values
Loading the value which is in the secon-
dary display or which has been entered
manually using the numeric keyboard:
Press the ”Ld” command key.
Now enter the number of the memory in
which you wish to store the value.
Confirm your entry by pressing the
appropriate function key (in this case
”Tare”)
The procedure is the same for organisa-
tional data memory, limit value memory
and tare memory. The reference weight
memory is only available in counting
mode. Switch over if necessary.
Recall of stored value
Press the ”i” command key and the
number of the memory where the value
you want is stored. Please note that
reference weights can only be called in
counting mode.
Confirm your entry by pressing the
appropriate function key (in this case the
limit memory)
Tare memory values and (in counting
mode) reference weight memory values
are activated by pressing the function key
again (in this case the limit value memory).
Clear memory
Press the ”CI” command key. Then enter
the number of the memory you want to
clear.
Confirm your entry by pressing the
appropriate function key (in this case
Count). Simply overwriting the memory as
described under ”Loading values” also
deletes the current value.
3
The indicator 2761 has a wide range of memory options:
10 tare memories
3 memories for organisational data
3 memories for set points or limit values
in the weighing and counting mode
and in counting mode
40 reference weight memories
These memory options are operated by means of the
numeric keyboard manual entry
and for calling the relevant memory number
command keys for loading, calling and deleting
function keys for activating the function