Filter
Top Products
_
Counting
11
Switch the scale to counting mode.
Determining the reference weight
Tare the empty container if necessary.
Place the number of items requested by
the scale or enter the reference number
of items required by the numerical key
board, take over with key , place
entered number of items on the scale
and press the ” ” function key. The
average weight of one item is calculated.
The maximum number of pieces to be
counted without error appears in the
secondary display.
If the items are very light, more will be
requested. The display counts backwards
to zero as the items are placed on the
scales. Now press the count key again.
Displaying the reference weight
Entering the reference weight
manually in g.
Storing the current reference weight
The reference weight can be transferred
to
the current counting procedure by
pressing the ” ” function key a
second time.
Counting
The reference weight should be
determined, recalled or entered manually.
Place enough items to be weighed on
the scale so that the required number of
pieces can be met.
Counting with a tare weight
If the tare is unknown the empty
container should first be tared.
After you have switched to the counting
mode, the reference weight should be
determined, recalled or entered manually.
Now fill the container.
The number of items will be displayed.
If the tare is unknown, the filled container
can be placed on the scales immediately
after you have switched to counting mode.
Recall the reference weight or enter it
manually.
Enter the tare weight using the numerical
keyboard.
Call the tare from a tare memory and
confirm it.
The number of items will be displayed.
Terminate the counting procedure