Filter
Top Products
_
Switching and checking
in the counting mode
10
Loading memory
Enter number of pieces for set point with
the numeric keyboard.
Press the ”Ld” command key, followed
by the number of the memory.
Confirm your entry by pressing the
function key.
Memories 2 and 3 are entered and
displayed in the same way.
Recalling of stored values
Press the ”i” command key and the
number of the memory containing the
value you require.
Confirm your entry with the ” ”
function key.
Counting with limit values
Tare the container
Place the items to be counted on the scale.
The relevant symbol goes out when the
appropriate set point/limit value is reached.
Clearing memory
Press the ”CI” command key.
Now enter the number of the memory
you wish to delete.
Confirm your entry with the appropriate
function key. Simply overwriting the
memory as described under ”Loading the
memory” also deletes the current value.
Control weighing
Enter the upper and lower tolerance
number of pieces as in ”Loading memory”
in S1 and S2. Place the items to be
counted on the scale. The current number
of pieces and the tendency symbol appear
on the main display:
Number of pieces is less than set value ”S1”
Number of pieces is within the tolerance
”S1-S2”
Number of pieces is higher than set value ”S2”