Filter
Top Products
- 31 -
2. Technical characteristics
Dimensions
Height 814 mm Empty weight 60 kg
Width 376 mm Empty weight including packaging 67 kg
Depth 600 mm
Installation characteristics
Power cable 3x1 length 1.5 m Diameter of waste discharge pipe 4 mm
Plug Schuko Length of waste discharge pipe 1.5 m
Length of filler pipe 1.5 m Delivery fitting 3/4 inches
Filler pipe collar
¾
inches
THIS APPLIANCE IS MARKED AS REQUIRED BY EU DIRECTIVE 2002/96/EC, WASTE
ELECTRICAL AND ELECTRONIC EQUIPMENT (WEE).
BY MAKING SURE THAT THIS PRODUCT IS DISPOSED OF CORRECTLY THE USER
HELPS TO PREVENT POTENTIAL DETRIMENTAL EFFECTS ON HEALTH AND THE
ENVIRONMENT.
THE SYMBOL
ON THE PRODUCT OR IN THE TECHNICAL DOCUMENTATION
INDICATES THAT THIS PRODUCT MUST NOT BE TREATED AS ORDINARY DOMESTIC
WASTE BUT MUST BE CONSIGNED TO THE SPECIAL COLLECTION POINT FOR THE
RECYCLING OF ELECTRICAL AND ELECTRONIC EQUIPMENT.
WHEN DECOMMISSIONING THE APPLIANCE COMPLY WITH THE LOCAL WASTE DISPOSAL
REGULATIONS.
FOR FURTHER INFORMATION ON THE TREATMENT, RECOVERY AND RECYCLING OF THIS
PRODUCT, CONTACT THE COMPETENT LOCAL OFFICE, THE DOMESTIC WASTE
COLLECTION SERVICE, OR THE SHOP WHERE THE PRODUCT WAS PURCHASED.
FOR ANY TECHNICAL OR OPERATIONAL INFORMATON, PLEASE CONTACT OUR
TECHNICAL SERVICE DEPARTMENT.
IMPORTANT:
DURING THE WARRANTY PERIOD THE MACHINE MAY NOT BE WORKED ON WITHOUT
ADVANCE AUTHORISATION FROM OUR TECHNBICAL SERVICE DEPARTMENT. FAILURE
TO ABIDE BY THIS RULE VOIDS THE WARRANTY.
GENERAL DESCRIPTION:
THE APPLIANCE PRODUCES OSMOSIS- TREATED WATER, WITHOUT DISSOLVED SALTS,
WITH A RESIDUAL CONDUCTIVITY IN THE RANGE 20 TO 100 MICROSIEMENS, INTENDED
EXCLUSIVELY FOR TECHNOLOGICAL APPLICATIONS. THE UNIT CONSISTS OF AN ARRAY
OF FILTER CARTRIDGES. THE INVERSE OSMOSIS MEMBRANES ARE LODGED IN
POLYPROPYLENE HOUSINGS. THE OSMOSIS PUMP IS CONSTRUCTED IN BRASS