Filter
Top Products
- 37 -
Special adjustments:
RECIRCULATION
Recirculation retreats the waste water to reduce the amount of
water rejected. Turn the needle valve “Recirculation” to retreat
the waste water, thus reducing overall water consumption.
Important!
Make sure, when making adjustments, that the pressure
gauge reading never exceeds 10-11 bar.
BYPASS
Turn the “Bypass” needle valve to adjust the conductivity of the
osmosis-treated water, at the expense of the hourly water
production and the amount of water rejected.
NOTE:
In both cases, before setting the needle valves you must slacken
off their collars and tighten them down after the adjustment has
been made.
Recirculation Bypass
Collar
Inactivity:
There are no special warnings regarding maintaining the appliance’s operability
when kept inactive for short
periods of time.
For long periods of inactivity contact your local Authorised Reseller so that he can remove and store the
inverse osmosis membranes and also restart the unit after recommissioning as for the first installation.