Filter
Top Products
a.
b.
c.
d.
Setting Date, Time and Levels
16
Setting Date, Time and Levels
Setting date and time
Press "MODE" button ("month" starts flashing)
Press "[
]" and "[ ]" button to set and adjust the correct
month (1, 2, 3 ....12)
Press "MODE" button again ("date" starts flashing)
Press "[ ]" and "[ ]" button to set and adjust the correct
date
Press "MODE" button again ("hour" starts flashing)
Press "[ ]" and "[ ]" button to set and adjust the correct
hour in 12-hour format. A "PM" will appear for PM and dis-
appear for AM.
Press "MODE" button again ("minute" starts flashing)
Press "[ ]" and "[ ]" button to set and adjust the correct
minute (00, 01, 02 ...59)
17
Setting Date, Time and Levels
Setting Date, Time and Levels
After setting the minute you will automatically be prompted to
set the personalized level for Memory Zone 1. The storage of
240 memory readings is divided into 3 memory zones, each
maintaining up to 80 memory readings. The following explains
how to set your personalized level in each zone.
Your personalized level should be decided between you
and your healthcare provider.
Before setting your levels it is important to know:
*Your systolic rate is set between 70 and 250 mmHg.
*Your diastolic rate is set is between 40 and 115 mmHg.
Press "MODE" button
(" - - " will flash for 1st systolic self-management)
Press " " or " " button to set/adjust the personalized
systolic rate
Press "MODE" button
(" - - " will flash for 1st diastolic self-management)
Press " " or " " button to set/adjust the personalized
diastolic rate
Press "MODE" button
(" - - " will flash for 2nd systolic self-management)
Press "
" or " " button to set/adjust the personalized
systolic rate
Press "MODE" button
(" - - " will flash for 2nd diastolic self-management)
Press "
" or " " button to set/adjust the personalized
diastolic rate
Press "MODE" button
(" - - " will flash for 3rd systolic self-management)
Press " " or " " button to set/adjust the personalized
systolic rate
Press "MODE" button
(" - - " will flash for 3rd diastolic self-management)
Press " " or " " button to set/adjust the personalized
diastolic rate
Setting personalized levels
a.
b.
c.
d.
e.
f.
The examples above illustrate setting personalized levels in all 3
zones. After setting your Personalized Alert Level, you will automati-
cally be given the option to set a Multi-Measurement for that zone. If
you choose not to set a Multi-Measurement, just enter 1. After enter-
ing these settings you will be returned to the Rest mode and can take
a measurement by pressing START/STOP.
If the batteries have run down or are removed or the
adapter has been unplugged, the time and date will have
to be reset.